110V Automatic Edge Banding Machine Multi-Function Sealing and Repairing Machine Upper Control Panel Edging Speed 0-6m/min Double-Sided Trimming

Parameter Voltage: 110V Edging speed：0-6m/min Conveying speed: 0-15m/min Self-propelled motor power: 60W Conveyor motor power: 25W Polishing motor power: 750W Trimming machine power: 800W Sealing strip width: 12-30mm Sealing strip thickness: 0.8-2mm Trimming method: double-sided trimming Gluing method: double-sided gluing Control mode: intelligent temperature control Break mode: Automatic break Scope of use: Suitable for side sealing: Furniture edge sealing materials such as wooden veneer and plastic, with a smooth rubber surface. Plastic side sealing tape: When heating, it must be coated with hot melt adhesive and must not deform. Plastic side tape, the coating surface must be pre coated with backing adhesive (which can activate the backing adhesive and hot melt adhesive). Suitable for hot melt adhesives: low to medium temperature hot melt adhesives with melting points below 120 ℃ -170 ℃. Suitable for workpiece frames: Can be bonded to frames of hot-melt wood, flower board, medium fiber board, particleboard and other board materials.

• [Working mode] The trimming method of the fully automatic edge banding machine is double-sided trimming, the gluing method is double-sided gluing, the control method is intelligent temperature control, and the interruption mode is automatic interruption. It can be directly applied to the edge sealing operation of irregular straight lines and arcs in sheet metal.
• [Parameters] The voltage of the edge banding repair machine is 110V, the grinding speed is 0-6m/min, the conveying speed is 0-15m/min, the self-propelled motor power is 60W, the conveyor motor power is 25W, the polishing motor power is 750W, and the edge trimming machine power is 800W.
• [Unique Design] The fully automatic edge banding machine adopts a special structural design, which allows the use of both the board and the edge banding machine tape, ensuring a more uniform and firm adhesion, and a more perfect edge banding effect.
• [Shorten preheating time] The special design of the glue pot increases its volume, greatly reducing the preheating time and ensuring sufficient melting capacity.
• [Accurate and fast edge sealing] By combining manual feeding with manual control and electric roller pressing mode, the edge sealing process can be carried out accurately and quickly. The work design of each part is strictly and orderly, with no delamination or overflow phenomenon.